| Table of Contents |
|---|
The "Weight" chart type uses zones and the weight table to calculate the rate.
...
Field Name | Description | ||
|---|---|---|---|
Zone begins with | Search for all weight break values that include the zone in the Zone column. | ||
Zone | Zone for the pickup location.
| ||
WeightBreak | Weight amount to start charging. | ||
Rate | The rate amount to charge. | ||
Per | The number of pounds included in your rate. | ||
Minimum | Optional. The lowest amount charged for the weight break. | ||
Plus | Optional. Additional dollar amount. If a negative amount is entered it will be subtracted from the calculated amount. | ||
Cap | Optional. Maximum amount charged for the weight break. | ||
Always use next weight break if less expensive | Always assess the lower price if the previous weight break is lower. | ||
Apply weight rating to SureRate | Allows you to add your weight rating when calculating the rate based on mileage from the general tab. | ||
Always use the whole rate | Allows you to charge the entire amount when your weight amount exceeds the previous grouping. ExampleAlways use the whole rate is enabled and you have a single line item with a Per of $10 for every grouping of 10 lbs, the rate chart would charge $10 for the 1st through 10th lbs, $20.00 for the 11th through 20th lbs, $30.00 for the 21st through 30th lbs, and so on. | ||
Weight Break Use | |||
Use maximum value between the zone weight break and zone rate details | Use the higher price between the weight rate table charges and the base rate charges in the base rate Base Rate Details tab. | ||
Use the combined values of the zone weight break and zone rate details | Use and combine the weight rate table charges and the base rate charges in the base rate Base Rate Details tab. | ||
...
However, if you have a Rate greater than 0 set in the Stamp Rate Details tab on the stamp rate chart with the same zone, the rate will change depending on the "Weight Break Use" selected.
...
5-9 $1.00 per lbs with Base Rate $7.50 "Use maximum value..." | 5-9 $1.00 per lbs with Base Rate $7.50 "Use the combined values..." |
|---|---|
5 = $7.50 6 = $7.50 7 = $7.50 8 = $8.00 9 = $9.00 | 5 = $12.50 6 = $13.50 7 = $14.50 8 = $15.50 9 = $16.50 |
Example Using *DEFAULT*
| Info |
|---|
Requires X Dispatch 21.0 or newer. |
*DEFAULT* is a wild card to use any zones for the location(s) that have not been set up in the Weight Ranges grid.
...
In this example, route stops from any zone with a weight that is between 5 and 9 pounds rate at $1.00 per lb. Once the weight reaches 10 pounds, it will rate at $2.00 per lb.
5-9 $1.00 per lbs | 10-14 $2.00 per lbs |
|---|---|
5 = $5.00 6 = $6.00 7 = $7.00 8 = $8.00 9 = $9.00 | 10 = $20.00 11 = $22.00 12 = $24.00 13 = $26.00 14 = $28.00 |
However, if you have a Rate greater than 0 set in the Stamp Rate Details tab on the stamp rate chart with the same zone, the rate will change depending on the "Weight Break Use" selected.
...
5-9 $1.00 per lbs with Base Rate $7.50 "Use maximum value..." | 5-9 $1.00 per lbs with Base Rate $7.50 "Use the combined values..." |
|---|---|
5 = $7.50 6 = $7.50 7 = $7.50 8 = $8.00 9 = $9.00 | 5 = $12.50 6 = $13.50 7 = $14.50 8 = $15.50 9 = $16.50 |