| Table of Contents |
|---|
...
The Weight Ranges tables allow you to configure weight breaks that will be based on the weight set up on the order. It is used with "Weight" chart types only.
...
Field Name | Description | ||
|---|---|---|---|
Zone begins with | Search for all weight break values that include the zone in the Zone column. | ||
Zone | Zone for the pickup location.
| ||
WeightBreak | Weight amount to start charging. | ||
Rate | The rate amount to charge. | ||
Per | The number of pounds included in your rate. | ||
Minimum | Optional. The lowest amount charged for the weight break. | ||
Plus | Optional. Additional dollar amount. If a negative amount is entered it will be subtracted from the calculated amount. | ||
Cap | Optional. Maximum amount charged for the weight break. | ||
Always use next weight break if less expensive | Always assess the lower price if the previous weight break is lower. | ||
Apply weight rating to SureRate | Allows you to add your weight rating when calculating the rate based on mileage from the general tab. | ||
Always use the whole rate | Allows you to charge the entire amount when your weight amount exceeds the previous grouping. ExampleAlways use the whole rate is enabled and you have a single line item with a Per of $10 for every grouping of 10 lbs, the rate chart would charge $10 for the 1st through 10th lbs, $20.00 for the 11th through 20th lbs, $30.00 for the 21st through 30th lbs, and so on. | ||
Weight Break Use | |||
Use maximum value between the zone weight break and zone rate details | Use the higher price between the weight rate table charges and the base rate charges in the base rate Base Rate Details tab. | ||
Use the combined values of the zone weight break and zone rate details | Use and combine the weight rate table charges and the base rate charges in the base rate Base Rate Details tab. | ||
How Does it Work?
X Dispatch will check if a route stop falls into one of the weight breaks listed. In a tiered rating situation, the rating calculation will not look at the previous rate, only the line specifying the rating for the applicable item break.
...
In this example, route stops zone 02215 with a weight that is between 5 and 9 pounds rate at $1.00 per lb. Once the weight reaches 10 pounds, it will rate at $2.00 per lb.
5-9 $1.00 per lbs | 10-14 $2.00 per lbs |
|---|---|
5 = $5.00 6 = $6.00 7 = $7.00 8 = $8.00 9 = $9.00 | 10 = $20.00 11 = $22.00 12 = $24.00 13 = $26.00 14 = $28.00 |
However, if you have a Rate greater than 0 set in the Stamp Rate Details tab on the stamp rate chart with the same zone, the rate will change depending on the "Weight Break Use" selected.
...
5-9 $1.00 per lbs with Base Rate $7.50 "Use maximum value..." | 5-9 $1.00 per lbs with Base Rate $7.50 "Use the combined values..." |
|---|---|
5 = $7.50 6 = $7.50 7 = $7.50 8 = $8.00 9 = $9.00 | 5 = $12.50 6 = $13.50 7 = $14.50 8 = $15.50 9 = $16.50 |
Example Using *DEFAULT*
| Info |
|---|
Requires X Dispatch 21.0 or newer. |
...
In this example, route stops from any zone with a weight that is between 5 and 9 pounds rate at $1.00 per lb. Once the weight reaches 10 pounds, it will rate at $2.00 per lb.
5-9 $1.00 per lbs | 10-14 $2.00 per lbs |
|---|---|
5 = $5.00 6 = $6.00 7 = $7.00 8 = $8.00 9 = $9.00 | 10 = $20.00 11 = $22.00 12 = $24.00 13 = $26.00 14 = $28.00 |
However, if you have a Rate greater than 0 set in the Stamp Rate Details tab on the stamp rate chart with the same zone, the rate will change depending on the "Weight Break Use" selected.
...
5-9 $1.00 per lbs with Base Rate $7.50 "Use maximum value..." | 5-9 $1.00 per lbs with Base Rate $7.50 "Use the combined values..." |
|---|---|
5 = $7.50 6 = $7.50 7 = $7.50 8 = $8.00 9 = $9.00 | 5 = $12.50 6 = $13.50 7 = $14.50 8 = $15.50 9 = $16.50 |
| Page Properties | ||
|---|---|---|
| ||
|