| Table of Contents |
|---|
...
How to Create a New Weight Stamp Rate Chart
Click the arrow next to the New button, or press the N key.
Click Stamp Rate Chart.
Under Chart Type select "Weight".
Select the zone to apply the stamp rate to.
Click on the Weight Table button.
Enter the weight ranges and click OK. See Weight Ranges below for more information.
Click Apply to save the rate chart and keep it open or click OK to save and close the rate chart.
...
See Base Rate Charts - New / Edit Stamp Rate Charts for more information on base rate charts.
...
How to Add a Weight Break
Go to Maintenance > Rate Charts.
Click the '+' next to Base Rates.
Click the '+' next to the base rate group then double click the chart you would like to add to.
Click on the Weight Table button.
Enter the weight break.
Click the OK button to save.
How to Edit a Weight Break
Go to Maintenance > Rate Charts.
Click the '+' next to Base Rates.
Click the '+' next to the base rate group then double click the chart you would like to edit a weight break.
Click on the Weight Table button.
Edit the weight range details.
Click the OK button to save.
How to Delete a Weight Break
Go to Maintenance > Rate Charts.
Click the '+' next to Base Rates.
Click the '+' next to the base rate group then double click the chart you would like to delete a weight break.
Click on the Weight Table button.
Select the weight break you would like to delete by clicking on the box on the left, the row will highlight blue.
Press the Delete button on your keyboard.
Click the OK button to save.
Example
...
In this example, route stops zone 02215 with a weight that is between 5 and 9 pounds rate at $1.00 per lb. Once the weight reaches 10 pounds, it will rate at $2.00 per lb.
5-9 $1.00 per lbs | 10-14 $2.00 per lbs |
|---|---|
5 = $5.00 6 = $6.00 7 = $7.00 8 = $8.00 9 = $9.00 | 10 = $20.00 11 = $22.00 12 = $24.00 13 = $26.00 14 = $28.00 |
However, if you have a Rate greater than 0 set in the Stamp Rate Details tab on the stamp rate chart with the same zone, the rate will change depending on the "Weight Break Use" selected.
...
5-9 $1.00 per lbs with Base Rate $7.50 "Use maximum value..." | 5-9 $1.00 per lbs with Base Rate $7.50 "Use the combined values..." |
|---|---|
5 = $7.50 6 = $7.50 7 = $7.50 8 = $8.00 9 = $9.00 | 5 = $12.50 6 = $13.50 7 = $14.50 8 = $15.50 9 = $16.50 |
Example Using *DEFAULT*
...
*DEFAULT* is a wild card to use any zones for the location(s) that have not been set up in the Weight Ranges grid.
...
In this example, route stops from any zone with a weight that is between 5 and 9 pounds rate at $1.00 per lb. Once the weight reaches 10 pounds, it will rate at $2.00 per lb.
5-9 $1.00 per lbs | 10-14 $2.00 per lbs |
|---|---|
5 = $5.00 6 = $6.00 7 = $7.00 8 = $8.00 9 = $9.00 | 10 = $20.00 11 = $22.00 12 = $24.00 13 = $26.00 14 = $28.00 |
However, if you have a Rate greater than 0 set in the Stamp Rate Details tab on the stamp rate chart with the same zone, the rate will change depending on the "Weight Break Use" selected.
...
5-9 $1.00 per lbs with Base Rate $7.50 "Use maximum value..." | 5-9 $1.00 per lbs with Base Rate $7.50 "Use the combined values..." |
|---|---|
5 = $7.50 6 = $7.50 7 = $7.50 8 = $8.00 9 = $9.00 | 5 = $12.50 6 = $13.50 7 = $14.50 8 = $15.50 9 = $16.50 |
...